Steve Kroop at Flytec USA () writes:

Version 2.24 for the 5030/Compeo and version 1.18 for 5020/Competino have been officially released. The new firmware has some new features, some improvements to existing features, as well as some bug fixes. We have seeded it with several pilots for several months and have received no negative reports. A list of the changes and the updated firmware is available:

http://www.flytec.com/Products/Software/5030GPS.htm

http://www.flytec.com/Products/Software/5020GPS.htm

http://www.braunigerusa.com/software.htm#firmware

New features for the 5030/Compeo:

McCready audio deadband shown in thermal averager ring
New user field: L/D required to goal
New user field: Cross track error - shows perpendicular distance to the active leg of a route.
Additional speed off-set (user selectable0-10km/h) to correct for the slower airflow under the wing
New flight acceptance: If GPS is active, flight recording will begin after 60s of GPS Speed >10km/h or a change in altitude greater than 30m. If GPS is off, flight recording will start with a change in altitude greater than 30m
Recordings <3 minutes will not be saved in flight memory
Bug fix: Memory not corrupted if there are more than 100 flights in memory
Bug fix: No shut down when handling 10 nearest CTRs

Discuss Firmware at the Oz Report forum
   
 
 
del.icio.us