https://youtu.be/eagL6WKL0Jg

Wills Wing writes:

The T3 at Fort Funston!

Addressing some things brought up in the video:

The wrinkles on the leading edge graphic they are referring to at the beginning
- That holographic material we got was a free sample. It seems to stick just
fine at first but after setting up and breaking down those wrinkles showed up.
It's possible that the material is just old and the adhesive isn't working like
it should, or many other things. We probably won't be using that stuff much. It
does look pretty sweet though and you can see it reflecting nicely toward the
end of this video when Diver Dave is flying.

The carbon battens - yes other manufacturers have carbon battens, but ours are
significantly different in that we over-mold the carbon directly on to the 12mm
aluminum tubing material. This gives us all the stiffness but in a much lighter
overall part then an all carbon tube. An all carbon tube with the same wall
thickness would be far too brittle and would crack very easy. Thus, an all
carbon batten would have to have a very thick wall and be much heavier.

The new Velcro Joey points out is special "low profile" Velcro. It's 1/3rd the
thickness of regular Velcro yet seems to have even stronger holding strength
then the regular stuff. We dig it and use it where we can.